Devkit Specifications
Lepton Thermal Imaging, Infrared (IR) Sensor Evaluation Board
FLIR
The FLIR Lepton Thermal Camera Breakout is an easy to interface to evaluation board to
quickly evaluate the FLIR Lepton Camera module. It is compatible with a number of low-cost
Arm-based evaluation boards such as the NUCLEO-F401RE. In addition it is easy to wire to
any non-standard pinouts as well such as the Raspberry PI. The 50-degree shuttered, 50-degree, and 25-degree Lepton modules accept 3V to 5.5V input voltages in a 25 mm x 24 mm form factor. The add-on board supports applications such as thermal imaging, motion sensing, night vision, and gesture recognition.
| Item | Specification |
|---|---|
| Chip | |
| Compute | |
| Memory | |
| I/O and Peripherals | • 25 MHz reference clock • 100 mil Arduino-compatible pinout header • .5 mm FPC connector • 32-pin Molex Camera Socket • I2C (SCL, SDA) • SPI (CLK, MISO, MOSI, CS) |
| Wireless | |
| Software | • Pure Engineering github |