Embedded Computing Design

The IEEE 802.3-compliant 88Q6113 is an 11-port Ethernet switch that supports RGMII/ MII/RMII/, SGMII, XFI Multi-Speed SerDes (1/2.5/5/10 Gbps), and PCIe Gen 3.0.

There are many aspects to the environment of disruptive change around the migration towards e-mobility and electric vehicles

The HARTING interface module helps adapt the vehicle for a wide range of tasks in a fast, flexible manner.

The rapid transition capability of the AEC Q101-qualified EPC2216 provides power pulses to drive laser diodes, VCSELs or LEDs at up to ten times faster than an equivalent MOSFET.

Accepting an input from 2.7Vdc to 17Vdc, the LTM4668 and LTM4668A support an output voltage range from 0.6V to 5.5V.

USB-PD is made possible by the universal USB-C connector, and the next development stage will be permanently installed USB-PD wall outlets.

The 9900D uses 400kVA power modules integrated with intelligent bypass modules in 1200kVA, 1600kVA, 2000kVA sizes

With a dropout voltage of 115mV and operating current of 285?A, the device requires no external power transistors or capacitors

The REAL3 single-chip solution measures 4.4 x 5.1 mm, and offers high-resolution data with low power consumption.

The devices target automotive apps like infotainment screens and touch-sensitive steering wheels.

The SoC combines ST?s ultra-low-power STM32 microcontroller design with a LoRa-compliant radio, in one single-die device.

The tri-color Electronic Paper Display modules offer high bi-stable images of at up to 134dpi

In its first release, PowerLOK will offer 20A and 30A versions.

Disruptive technology development isn't new, it's only inevitable.

Powercast?s embedded Powerharvester receiver harnesses RF energy sent over the air from the PowerSpot transmitter, then converts it to DC

The VGA imagers are presented as having the industry's smallest pixel size at 2.2 microns

The module helps determine lane-accurate positioning vital for many road-safety applications of V2X

TriEye?s Short-Wave Infra-Red (SWIR) sensing technology can enhance visibility in adverse weather and night-time conditions.

Accepting a supply voltage from 4.5V to 40V and 55V respectively, the AL8843Q and AL8862Q can withstand severe voltage variations without suffering any corresponding degradation in the LED drive curre

The power modules feature a maximum allowed overload junction temperature of 175?C.