Pentek Unveils 6.4 GHz A/D and D/A Jade 3U VPX Module
November 21, 2019
The Model 54141A is a dual-channel analog-to-digital and digital-to-analog converter with sample rates up to 6.4 GHz
Pentek introduced the latest member of their Jade family of high-performance data converter 3U VPX modules based on the Xilinx Kintex Ultrascale FPGA. The Model 54141A is a dual-channel analog-to-digital and digital-to-analog converter with sample rates up to 6.4 GHz. Programmable DDCs (digital downconverters) and DUCs (digital upconverters) support connections to IF or RF signals.
In addition to compliance with the VITA 65.0 3U VPX specification, the Model 54141A also offers flexible analog and digital interface options for the VPX P2 backplane connector for system-specific requirements. In addition to its PCIe Gen.3x8 interface on the VPX P1 connector, it is possible to add up to 8 more gigabit serial lanes connected directly to the FPGA for supporting user-installed protocols.
The Model 54141A supports the emerging VITA 66.5 optical interconnect standard by providing four optical duplex lanes to a mating spring-loaded backplane connector. With the installation of a serial protocol like 10 or 40 Gigabit Ethernet in the FPGA, the interface enables high-bandwidth digital communications between boards or chassis independent of the PCIe interface.
An optional VITA 49.2 data transport protocol IP module conveys digitized signal metadata for signal acquisition and processing elements in communication, radar or storage systems. System integrators get to market with less time and risk, because the Model 54141A can provide a complete turnkey acquisition/generation solution, often without the need to develop FPGA IP.
The Model 54141A 3U VPX module with 5 GB of DDR4 SDRAM starts at $20,495. Additional FPGA options are available. Delivery is 12 weeks ARO. The Navigator Design Suite consists of two packages. The Navigator BSP is $2,500 USD and the Navigator FDK is $3,500 USD.