Pentek’s Digital I/O XMC Architecture Module

Pentek, Inc., today introduced the newest member of the Jade™ family of data converter XMC modules. The Model 71810 is based on the Xilinx Kintex Ultrascale FPGA and features LVDS digital I/O to meet custom requirements. The Model 71810 routes 38 pairs of LVDS connections from the FPGA to an 80-pin connector on the front panel. When mounted on a compatible single board computer or other XMC carrier, the Model 71810 provides a fully customizable I/O signal status and control interface.

“The Jade Model 71810 is a fundamental FPGA engine with a choice of FPGA resources to meet needs from low cost to high performance,” said Robert Sgandurra, director of Product Management. “Pentek’s modular approach to product design lets us quickly tune our products to our customer’s needs.” The Jade XMC line uses personality modules to enable customization of XMC front end functions to meet customer I/O needs.

The Model 71810 can be populated with a range of Kintex UltraScale FPGAs to match specific requirements of the processing task, spanning from the entry-level KU035 (with 1,700 DSP slices) to the high-performance KU115 (with 5,520 DSP slices). The KU115 is ideal for demanding modulation/demodulation, encoding/decoding, encryption/decryption, and channelization of the signals between transmission and reception. For applications not requiring large DSP resources or logic, a lower-cost FPGA can be installed.

The Model 71810 can be optionally configured with a P14 PMC connector with 24 pairs of LVDS connections to the FPGA for custom I/O to the carrier board or backplane. An additional option for a P16 XMC connector with an 8X gigabit link to the FPGA supports serial protocols.

With the Xilinx Kintex Ultrascale FPGA, LVDS digital I/O and gigabit serial I/O, the Model 71810 becomes an excellent high performance off-load co-processor to fit a wide assortment of processing needs in the most demanding of applications.

The Jade Architecture

The Pentek Jade architecture is based on the Xilinx Kintex UltraScale FPGA, which raises the digital signal processing (DSP) performance by over 50% with equally impressive reductions in cost, power dissipation and weight. Its PCI Gen.3 interface allows access to control and status registers for controlling algorithms, state machines and data flow across the LVDS I/O front panel and carrier board interfaces. A 5 GB bank of DDR4 SDRAM is available for additional functions. The factory-installed DMA controller can sustain 6.4 GB/s data transfers across PCIe.

Navigator Design Suite for Streamlined IP Development

Pentek’s Navigator™ Design Suite was designed from the ground up to work with Pentek’s Jade architecture and Xilinx’s Vivado Design Suite® providing an unparalleled plug-and-play solution to the complex task of IP and control software creation and compatibility. Graphical design entry for Xilinx and Pentek AXI4-compliant IP modules using the Xilinx IP Integrator greatly speeds development tasks. The Navigator Design Suite consists of two components: Navigator FDK (FPGA Design Kit) for integrating custom IP into Pentek sourced designs and Navigator BSP (Board Support Package) for creating host applications. Users can work efficiently at the API level for software development and with an intuitive graphical interface for IP design. The Navigator BSP is available for Windows and Linux operating systems.

Pricing and Availability

Designed for air-cooled, conduction-cooled and rugged operating environments, the Model 71810 XMC module with 5 GB of DDR4 SDRAM starts at $8,495 USD. Delivery is 8 to 10 weeks ARO. The Navigator Design Suite consists of two packages. The Navigator BSP is $2,500 USD and the Navigator FDK is $3,500 USD.

About Pentek

Pentek, an ISO 9001:2015 certified company, designs and manufactures innovative commercial and rugged DSP boards and real-time system recorders for commercial, government and military systems including radar, communications, SIGINT, defense, medical and industrial control applications. Pentek offers powerful VPX, FMC, FMC+, AMC, XMC, cPCI and PCIe board solutions featuring high-performance Xilinx FPGAs. Pentek equips all boards and recorder products with high-performance I/O including gigabit serial interfaces, powerful software development tools and offers strong DSP software support.

###

Pentek, Jade and Navigator are trademarks or registered trademarks of Pentek, Inc. Brand or product names are registered trademarks or trademarks of their respective holders.

For access to the release and data sheets, please visit: https://www.pentek.com/whatsnew/viewrelease.cfm[...]

For North American and International sales contacts, please go to:

www.pentek.com/contact/contact.cfm?HID2=TMReps#[...]